CNC Lathes
Closed Lots
XYZ Proturn SLX 555 –CNC Lathe (2011)
Prototrak SLX Control
Used Hitachi Seiki Hitech Turn 25S Turning Centre
Fanuc 10T Control with red cap AC motors
C axis and milling
50 station ATC
HAAS TL-2CE CNC Toolroom Lathe (2005)
HAAS control, Tailstock, 254mm chuck, coolant
Mazak Super Quickturn 200M CNC lathe, with C axis and milling (1999)
Mazatrol PC Fusion CNC 640T control
Mazak Integrex 200 SY with Magazine Barfeed (2001)
Mazak Fusion 640T control
Hurco TM10 CNC Lathe (2005)
Hurco WinMax Control
Used Hitachi Seiki Hitech Turn 25S Turning Centre
Fanuc 10T Control with red cap AC motors
C axis and milling
50 station ATC
Kia Turn CNC Lathe
Fully automatic programmable tailstock
30m/min rapids
20hp motor
q setter
0.1 Second turret index
4000 rpm
Colchester 4000L CNC Lathe
Control Fanuc OT
Swing over Bed 535 mm
Swing over cross-slide 370 mm
Distance centre tot centre 2000 mm
Dia of spindle bore 90 mm
Number of speeds 20-1600 rpm
Total power needed 9,3 kW
Colchester 4000 CNC Lathe
Fanuc O-T Control
Spindle bore 90mm
Spindle drive 9.3kw
Spindle nose 11" D1 Camlock
Swing over bed 535mm
Swing over cross slide 370mm
Distance between centres 1000mm
X Axis stroke 260mm
Inch/metric data input
Used Cincinnati Hawk 200CX CNC Lathe
5 VDI tool holders
Colchester Master VS3250 Gap Bed Centre Lathe
170mm centre height,
350mm swing over bed,
196mm swing over cross slide,
580mm swing in gap,
762mm between centres,
42mm spindle bore,
Speeds to 3250rpm,
coolant,
3 jaw chuck,
Quick change toolpost,
Newall DRO
Milltronics ML20 Series E CNC Teach Lathe
SWING OVER THE CROSS SLIDE: 12"
SWING OVER THE WAYS: 20"
CENTER DISTANCE: 60"
SPINDLE BORE: 3.3"
SPINDLE MOTOR: 7 HP
SPINDLE SPEED: 2200 RPM
8 STATION TURRET
EQUIPPED WITH:
CENTURION 6 CONTROLLER
12" 3-JAW CHUCK
TAILSTOCK
FIXES STEADY
8 STATION TURRET
Hitachi Seiki ST250 CNC Lathe (2002)
Control: Seicos PCFleixi
Swing over bed: 680mm
Chuck outer dia: 500mm
Max. maching dia: 254mm
Max. machining length: 470mm
Bar Capacity: 80mm
Spindle speed: 42~4200
Spindle speed range: Infinite
Spindle nose (type No): A2-8
Dia of spindle through hole: 95mm
12 station Turret
Tailstock
Tooling as per photo in box
Swarf conveyor
Coolant tray
Hitachi Seiki ST250 CNC Lathe (2001)
Control: Seicos PCFleixi
Swing over bed: 680mm
Chuck outer dia: 500mm
Max. maching dia: 254mm
Max. machining length: 470mm
Bar Capacity: 80mm
Spindle speed: 42~4200
Spindle speed range: Infinite
Spindle nose (type No): A2-8
Dia of spindle through hole: 95mm
12 station Turret
Tailstock
Tool holders
Swarf conveyor
Coolant tray
Doosan Puma MX2500ST Multi axis CNC Lathe (2004)
Date of manufacture December 2004
Max cutting diameter 540mm
Max cutting length 1020mm
Bar capacity 76mm
Spindle nose A2-8
Headstock spindle 3500rpm
Sub spindle speed 3500rpm
C axis index 0.001 degree
B axis +- 120 degree
Milling spindle CAPTO C6
Milling spindle 10,000 rpm
12” 3 jaw power chucks on main and sub spindle
40 station upper turret with 5 off capto tool holders included
12 station lower turret
Swarf conveyor
Used Hardinge Conquest T42 CNC Lathe
Fanuc 18-T control
Twin Turret with tool holders
Used Hardinge conquest T42 CNC Lathe
Fanuc 18-T control
Turret with holders
Filtermist
Star SR-32J Swiss Type CNC Lathe (2018) With Barfeed
Comes with the standard guide bush and an adaptable JBS bush system.
Max. machining diameter - φ32mm(1-1/4in) OP:φ34mm(1-11/32in)
Max. headstock stroke
Standard - 320mm(12-19/32in), R.M.G.B. type - 286.5mm(11-9/32in)
Number of tools - 6 tools, Tool shank - 16mm
5-Spindle sleeve holder
Number of tools - Front 5 tools & Rear 5 tools, Max. drilling capability - φ13mm(33/64in), Max. tapping capability - M12×P1.75
Power driven attachment
Number of tools - Cross milling 3 tools(ER20)＋Cartridge type 2 positions, Cross milling 4 tools(ER16)＋Cartridge type 2 positions, Cross milling 6 tools(ER16)
Max. drilling capability - φ10mm(25/64in), Max. tapping capability - M8×P1.25
Spindle speed - Cross milling：Max.6,000min-1, Cartridge-type tool：Max.8,000min-1, Drive motor - 2.2kW(continuous) / 3.0kW(5min./30%ED)
Rapid feed rate - 35m/min ( X1, X2,Y1, Z1, Z2 ), 24m/min ( Y2 ) : type B only, Main spindle indexing angle - C-axis control, Main spindle speed - Max.8,000min-1, Main spindle motor - 7.5kW(continuous) / 11.0kW(10min./25%ED), Coolant tank capacity - 275ℓ, Power consumption - 8.1kVA
A-weighted sound pressure : note-1 - Max.77dB